We don't just make it, we mill it everyday!

Get unmatched support when you buy Alien Zirconia Blocks from a team of professionals who use these blanks on a daily basis.

Now you can mill Alien Zirconia in your lab. Experience the highest quality and translucency the Zirconia world has to offer. Over 100,000 satisfied patients, doctors, and labs.

Available in...

White Zirconia 98mm Puck

98 mm x 12 mm
98 mm x 16 mm
98 mm x 20 mm
98 mm x 25 mm
98 mm x 30 mm
98 mm x 35 mm

Pre-Shaded Zirconia 98mm Puck (A1-D4)

98 mm x 12 mm
98 mm x 16 mm
98 mm x 20 mm
98 mm x 25 mm
98 mm x 30 mm
98 mm x 35 mm

Compatibility

98mm with a 10mm step. Compatible with Weiland, VHF, Roland, and most open CAD CAM Milling Machines.

Isostatic Pressing

Each Zirconia Blank is isostaically pressed for consistent results every time. We do not cut corners, as we use the exact same zirconia for our milling services.

Gentle on your Mill

Alien Zirconia Disks are softer in the green state, than generic zirconia. This extends the life of your spindle, and tools.

Translucency Factor

High Translucency has become a loosely used term to define the product, rather than the characteristics. The real definition lies in Translucency Parameters (TP), and Contrast Ratio (CR). The Contrast Ratio for Alien Zirconia Blanks are >34:1 CR %, one of the highest translucent zirconia offered in the industry.

Research

We research, and use 98 mm Alien Zirconia Blanks in our milling center everyday. We know our zirconia is out of this world. Many labs, doctors, and patients may be unaware Zirconia is a radioactive material. Safety is the main focus of the company, and we would not use unsafe materials exposing our technicians to unsafe materials.

Our Research and Development engineers continually test the zirconia powder for any traces of radioactivity, and makes sure the zirconia is 100% safe every time.

Material Safety Data Sheet and IFU

Sintering Schedule

For more programs, including programs for certain ovens, visit the sintering page

Up to 45 Units

Total Run Time: 12-13 Hours

Step	Start Temp C	End Temp C	Rate Climb / min	Time (mins)
1	0	900	10	90
2	900	900	0	10
3	900	1540	3	214.00
4	1540	1540	0	150
5	1540	0	0	Natural Cooling

Ivoclar Programat Oven

Step	t	T	H
1	10	900	10
2	3	1540	150
3	6	100	0

46 - 80 units

Total Run Time: 16-17 Hours

Step	Start Temp C	End Temp C	Rate Climb / min	Time (mins)
1	0	900	6	150
2	900	900	0	30
3	900	1540	3	214.00
4	1540	1540	0	270
5	1540	0	0	Natural Cooling

Warp Speed 5-15 units

(Fast Sintering)
Up to 3 Unit bridges only

Total Run Time: 2-2.5 Hours

Step	Start Temp C	End Temp C	Rate Climb / min	Time (mins)
1	0	1540	35	44
2	1540	1540	0	60
3	1540	300	45	28

**CAUTION - Please check with your sintering oven manufacture if the oven is capable. Fast Sintering cycles add stress on your oven, causing parts to wear and tear sooner.

FAST! Full Arch Hybrid Sintering Program

(Beta)
Total Run Time: 16.5 hours

Step	Start Temp C	End Temp C	Rate Climb / min	Time (mins)
1	0	900	6	150
2	900	900	Hold	30
3	900	1540	3	214.00
4	1540	1540	Hold	270
5	1540	1300	6	40
6	1300	1300	Hold	30
7	1300	1200	4	25
8	1200	1200	Hold	30
9	1200	900	6	50
10	900	0	6	150

Full Arch Hybrid Sintering Program

Total Run Time: 23-25 hours

Step	Start Temp C	End Temp C	Rate Climb / min	Time (mins)
1	0	900	6	150
2	900	900	Hold	30
3	900	1540	3	214.00
4	1540	1540	Hold	270
5	1540	1300	0	Natural Cooling
6	1300	1300	Hold	120
7	1300	1200	0	Natural Cooling
8	1200	1200	Hold	120
9	1200	1100	0	Natural Cooling
10	1100	1100	Hold	120
11	1100	1000	0	Natural Cooling
12	1000	1000	Hold	120
13	1000	900	0	Natural Cooling
14	900	900	Hold	60
15	900	0	0	Natural Cooling

Ivoclar Programat Oven

Step	t	T	H
1	10	900	10
2	3	1540	270
3	3	1200	0
4	6	1000	0
5	8	100	0

S.I.N. 360

SIN 360™ Premill Abutments

Share this Product

Other great brands

QUESTIONS & ANSWERS

Have a Question?